You are here
Trenchless Sewer Replacement Trenchless 

The Best Trenchless Pipe Repair in Sandy Springs, GA

When it comes to repairing the pipes, homeowners are often undecided about what sort of trenchless method they should use. The Trenchless Pipe Repair and Replacement has its merits, and all are substantially better than the traditional digging excavations that had to be conducted in the past. The following pipe repairs will inform you about which is best for your requirements in Sandy Springs, GA.

Pipe Bursting

If your pipes are close to complete breakdown, then it is best to replace them entirely. While small cracks and root intrusion can be tackled simply, if the problem has evolved into something worse, then it’s best to install new ones. Pipe bursting is perfect for those who have an old sewage system with pipes made out of cast iron, concrete or clay. These materials are prone to breaking down over time, and are no longer used, as plastic PVC lasts much longer and copes better with wear and tear.

Pipe bursting involves blowing the old pipe out of the way and inserting a new one in its place. This can be done without digging, since when blasting the existing pipe, the hole widens enough to slide a new one down through. Homeowners can also take this opportunity to improve their sewage system by installing a slightly wider pipe than before, which will have a better flow capacity.

Totally replacing a pipe is the best move if you want to avoid consistent maintenance further down the line. Old pipes are nowhere near as effective in preventing root intrusion or surviving the stress from earth movements without cracking. In contrast, PVC is much sturdier and able to withstand such pressures.

And, because the whole method is trenchless and needs no excavation at all, replacing a drains system is a hassle-free, and inexpensive job in Sandy Springs, GA – it’s especially ideal for those who need commercial pipe bursting, as it can be done in tight areas.

Pipe Relining

For those not in need of a full replacement, pipe relining can be a very good trenchless alternative. The process involves giving the pipe a new coat to remove any cracks that have formed on the pipes. A video inspection can be carried out beforehand to assess how bad the damage is and whether a relining will work.

Then, a full pipe cleaning will occur to remove any clogs and junk to ensure that the relining will be smooth against the existing pipe. A packer will then be placed into the pipe and inflated so that the resin material can stick and harden against the pipe. Once the resin has bonded against the pipe, the packer is deflated and removed, leaving a clean finish.

An additional video inspection can then be conducted to confirm whether the relining has been successful. A relining is a good way of strengthening an existing pipe which is beginning to falter, either due to the formation of cracks or rust. For even smaller issues, repairmen can inject resin into the cracks.

Pipe relining is a quick job since it is entirely trenchless, meaning it is not overly labor-intensive and can be done in a short space of time.

Related posts

Leave a Comment